A Chronology of Development by Daniel E. Watters
The SOPMOD PMO begins to centrally supply certain USSOCOM units with MRDs as an experimental Product Improvement Project (PIP), for additional user assessment. NSWC-Crane handles this on a limited basis using centralized small purchases.
Portugal announces adoption of the HK G36. A legal protest ensues.
The Mexican National Defense Secretariat (Sedena) seeks funds from the National Credit and Treasury agency for purchasing foreign technology to develop and produce an indigenously designed military rifle. Eventually, Sedena invests the equivalent of $45 million (USD) in the technology transfer, reportedly from HK.
Hornady and Ruger introduce the .204 Ruger. It uses a .222 Remington Magnum case necked down for .204″ projectiles.
With the approval of the final revision of the SCAR JORD, USSOCOM issues final Performance Specification documents for the SCAR-L and SCAR-H. An RFP is also issued. Projected procurement quantities are listed as follows:
|Sniper Variant (SV)||1||10||11,989|
|Sniper Variant (SV)||0||10||11,990|
TACOM awards Colt $11,260 for testing the suitability of the H2 buffer with M4 Carbines.
The British announce that their L85A2 IW and L86A2 LSW will require retrofitting with a new safety catch and spring. Troops in Iraq have encountered instances, in which they have disengaged their rifle’s safety, only to find that their rifle will not fire.
USSOCOM issues a pre-solicitation notice for the EGLM. Replacing earlier synopsis/solicitions, the EGLM contenders will now require a fire control module, with ranging capabilities out to 600 meters (+/- 5 meters). The goal is to provide a 25 percent increase in first-round accuracy over the existing M203 with the AN/PSQ-18A Grenade Launcher Sight (formerly known as the GLD/NSM). The fire control module and EGLM will also possess programmable data pathways for the future development and fielding of programmable 40x46mm munitions. All rights to the data interface are to be surrendered to the Government for the establishment of a MILSPEC, or other interface control document.
HK‘s Johannes Murello files an US patent application for the scope mount attachment system for the XM25.
NSWC-Crane awards a $14,700,000 contract to KAC for 22,000 suppressors, 10,000 compensators and 10,000 sets of installation materials for the M4A1 carbine. Six proposals had been solicited, and five offers were received.
TACOM modifies its sole-source solicitation to Polymer Technologies from 24,465 to 27,771 M249 100 Round Soft Pack Magazines.
TACOM awards a $229,866.18 delivery order to Polymer Technologies for 7,771 M249 100 Round Soft Pack Magazines.
ARDEC issues a requirement for a 5.56mm Close Combat Mission Capability Kit (CCMCK) to be used with the M16, M4, and M249. The CCMCK consists of low-velocity marking ammunition and weapon conversion kits.
Paul Leitner-Wise files a patent application for the 7.82x24mm PDW cartridge.
PEO-Soldier signs a memorandum of urgent requirement to justify the letter contract for the tooling, design improvement, and fielding of XM8 modular assault weapons to two Brigade Combat Teams (BCT) in the 2nd Quarter of FY 2005.
Colt submits an independent proposal to produce the XM8.
HK formally introduces the HKM4 system, consisting of product-improved replacement parts for the M4/M16 family. The most distinct change is the introduction of a gas piston system to replace the direct gas impingement system used in the typical M4/M16. Retrofitted weapons will have the option of four different barrel lengths (10, 14.5, 16.5, and 20 inches), but HK is also considering the possibility of offering upper receiver units and even the construction of complete weapons.
NSWC-Crane issues a sole-source solicitation to Colt for 15 M4A1 without carrying handle, 15 M4A1 with carrying handle, and 6 M4A1 with barrel and front sight assembly installed.
TACOM modifies its December 2003 delivery order from Aimpoint to reduce the individual cost of the M68, and increase the number of sights ordered by 1,285. The award is reduced by $175.
The DOD‘s Inspector General (DODIG) releases the report “Sole-Source Awards for Quick Disconnect Silencers.” The report finds that NSWC-Crane did not adequately plan its procurement of suppressors for the SOPMOD kit, and that its subsequent sole-source contracts to KAC were not justified. However, OPS Inc.’s claim that its suppressors were superior to the KAC design is rejected. NSWC-Crane is advised to either continue with the current competitive solicitation for the FMBS, or recompete the earlier suppressor award and only place delivery orders on KAC‘s sole-source contract to support compelling urgency.
NSWC-Crane releases another amendment to the MDNS solicitation. Final proposal revisions are requested from specific offerors for the Miniature Night Vision Sight II (MNVS II).
PM-Soldier Weapons and RDECOM–ARDEC issue a Sources Sought announcement for a COTS source of 200 round Soft Pack Magazines (belt bags) for the M249. The goal is to find a more durable product than the existing plastic belt box, while also reducing the noise created by the belt shifting during movement.
NSWC-Dahlgren, on behalf of the PM-Ammunition, MARCORSYSCOM and USSOCOM, issues a sources-sought announcement for the acquisition and qualification of non-developmental improvements to the existing 40mm M433 HEDP cartridge. Improvements must include increased accuracy, due to reduced deviations in muzzle velocity, and the incorporation of a self-destruct fuse. The warhead must provide a high penetration capability against a variety of targets, plus a high fragmentation effect.
RDECOM is officially established as a major subordinate command within AMC. It now assumes permanent control of the AMC‘s various research, development, and engineering centers, including ARDEC.
The US Army rejects Colt’s proposal to produce the XM8. It is argued that since HK owns the data rights to the XM8, Colt would not be able to make an exact duplicate of the rifle.
3ID Commanding General MG William G. Webster Jr. submits an operational need statement to Deputy Chief of Staff (G-3) LTG Richard A. Cody for an integrated modular assault weapon system in the form of the XM8. The ODCSA (G-3) does not validate or approve the operational need statement.
Funding for the XM8 R&D effort is increased to $3,750,000.
Lake City issues the report “Effects of Core Materials on Radial Displacement of 5.56mm Bullet Components Under Specific Loading Patterns and the Delineation of Deformation of Failure Mode Due to These Loads.”
The US Army awards a ~$9.2 million contract to Olin-Winchester for M855 Ball.
The US Coast Guard announces that the .499 LW conversions have been discontinued due to issues with unreliable ammunition and poor weapon function. The Office of Cutter Forces (G-OCU) is currently evaluating more traditional weapons to fill the gap between the M16 and the M240.
TACOM awards Okay Industries a $2,239,200 contract option for the production of 360,000 M16 thirty round magazines.
NSWC-Crane awards Litton Electro Optical Systems a $49,999,990 contract for Miniature Night Vision Sight II (MNVS II) development, part of the Miniature Day/Night Sight (MD/NS) program.
USSOCOM issues a solicitation for 12 to 3,000 COTS Visual Augmentation System (VAS) In Line Clip-On Night Sights for long gun application up to and including .50 caliber. This will replace the Integrated Day/Night Fire Control Observation Device (INOD) AN/PVS-19 and the Universal Night Sight AN/PVS-22. It will serve as a bridge until technology has matured where a full materiel solution can be achieved, i.e., a family of sniper sights which will meet the requirements of the JORD addendum dated 25 June 2003. The desired Optimal Resolution is 4.2 cycles per milliradian or better. The in-line sight must interface with existing day scopes without having to adapt/modify existing scope rings, current day scopes, or shooters’ firing positions. The system must also be able to mount on MIL-STD-1913 rails using a single throw lever type mounting system (KAC‘s PN: 22097 Knightscope base assembly) or equivalent.
NSWC-Crane, on behalf of the USMC, issues a sole-source solicitation to Litton Electro Optical Systems for a minimum of 1,056 AN/PVS-17B and 1,010 AN/PVS-17C Marine Corps Miniature Night Sights (MNS).
TACOM–ARDEC issues a market survey notice for a Close Quarters Battle Kit (CQB Kit) for use with the M16/M4. The kit will consist of the following items: 1) a compact cleaning kit; 2) a removable, spray-on weapons camouflage kit with a minimum of four colors; 3) a multiple magazine holder capable of holding two standard 30 round magazines; 4) an add-on forward Picatinny rail system with a minimum of three rails with one bottom- mounting rail; 5) an adjustable low profile bipod; 6) a stock-mounted magazine pouch; 7) a tactical sling; and 8) and an improved flash hider.
PM-Soldier Weapons issues a sources sought announcement for a Single or Three Point Sling for use with the M4 Carbine. The single point sling must provide ready access to the M4, with no sling repositioning necessary. It will attach the weapon directly to load bearing equipment and will allow the wearer to keep their weapon in a near-ready position while performing two-handed tasks. The three-point sling must provide with fast and easy transitions, free of tangling or twisting, and offer the individual soldier with custom positioning for weapon balance.
MARCORSYSCOM issues a RFI to identify foreign sources of COTS training bolts compatible with SNC Technologies’ Simunition FX Marking Cartridges. The Training Bolt will replace the currently existing SESAMS Upper Receiver for the M16 and M4. The Training Bolt will be exchanged with the standard bolt assembly to allow the use of 5.56mm SESAMS FX marking cartridges from standard issue weapons. The Training Bolt must be designed to prevent the accidental chambering and firing of lethal 5.56mm service ammunition of any type while the Training Bolt is installed.
ARDEC‘s Non-Lethal/Scaleable Effects Team issues a sources sought announcement for a COTS non-lethal, kinetic impact energy system. The system will physically deter a targeted individual with high accuracy at a range of 50 meters and a group of individuals at a range of up to 100 meters. The system must have a demonstrated effectiveness to deter focused, motivated aggressors. The item sought must be relatively lightweight with at least semi-automatic, rapid-fire, multi-shot capability. The system should also have marking and irritant non-lethal munitions/projectile capabilities. It is required that the system have a version that can be fixed as an under-barrel attachment to existing standard US lethal weapon platforms (M4/M16 rifle) as well as a stand-alone individual weapon configuration.
TACOM yet again modifies its December 2003 delivery order from Aimpoint to increase the individual cost of the M68, and reduce the number of sights ordered by 540. The award is reduced by another $165.
PM-Soldier Weapons issues a sources sought announcement for a Weapon Light. The Weapon light must attach to MIL-STD-1913 Rail system with an integral mount, provide minimum runtime of 60 minutes continuous on one battery change with a minimum output of 65 Lumens, provide for remote operation for momentary on by use of a tape switch (6″ minimum), possess attachable accessory “flip-up” IR filter, and be capable of safely and reliably functioning in a military environment.
RDECOM–ARDEC issues a sources sought notice for NDI Optical Aiming Devices for Small Caliber Weapons. This device will act as an add-on magnifier for the M68 CCO, providing a 2X to 3X image magnification while maintaining the red dot at minimal size to avoid interference with the gunner’s aiming ability. Items to be considered for this evaluation must be capable of withstanding exposure to harsh military environments and rough handling, without degradation of performance. This effort is part of a Foreign Comparative Testing (FCT) exercise; however, domestic sources are also invited to respond.
USAF Air Combat Command, 99th CONS – Nellis AFB issues a solicitation for accessories for the M4 to include (but not be limited to) infrared target pointer/illuminator/aiming laser, sound suppressor kit, forward pistol grip assembly and rail adaptor system.
NSWC-Dahlgren, on behalf of PM-Ammunition, MARCORSYSCOM, and USSOCOM, issues a solicitation for three types of NDI 40mm ammunition. Intended for use with the M79, M203, and EGLM, the cartridges will include a Tactical Marking Cartridge (IR), a Low Cost, Short Range Day/Night Training Cartridge, and an Extended Range 40mm Day/Night Training Cartridge.
NSWC-Crane issues a sole-source solicitation notice to Lewis Machine and Tool (LMT) for 130 M203 grenade launchers equipped with 9 inch barrels.
USSOCOM also announces its intent to include the EGLM as part of the SCAR solicitation. The contract will require a maximum of 21,000 EGLM, 25,000 fire control modules, and 25,000 stand-alone buttstocks.
On behalf of the US Army, James Grassi files a patent application for a low-velocity air-burst munition and programmable launching system to upgrade the existing M203.
HK‘s Johannes Murello receives US Patent #6,708,437 titled “Apparatus for Loading a Cartridge into a Cartridge Chamber.”
Malaysia’s National Aerospace and Defence Industries (NADI) and Steyr Mannlicher enter a joint venture to transfer Steyr’s production of the AUG to Malaysia.
Colt Defense LLC files suit against Bushmaster Firearms, Inc. and HK in the US District Court for the Eastern District of Virginia. Related to the marketing of the M4 Carbine, Colt cites acts of trademark infringement, trade dress infringement, trademark dilution, false designation of origin, false advertising, patent infringement, unfair competition, and deceptive trade practices. Colt is seeking injunctive relief and damages against the two companies.
TACOM awards Colt a $123,035,995 contract for the production of 124,803 M4 and M4A1 carbines. The first delivery order for 22,435 M4 and 1,288 M4A1 is worth $21,373,067.00. These are intended for the US Army, USMC, USAF, and FMS.
TACOM awards a $33,967.48 delivery order to FNMI for 74 M16A4. Later, TACOM awards an additional $2,430,051.88 delivery order for 5,294 M16A4. The latter rifles are intended for FMS. (This order is subsequently reduced by 10 rifles.) TACOM awards yet another delivery order worth $2,303,400.00 for 5,000 M16A4 rifles for FMS to Nepal.
USSOCOM amends the specifications and the RFP for the SCAR-L, SCAR-H, and EGLM. SCAR contenders must now be submitted with an EGLM, fire control module, and a stand-alone buttstock. Projected EGLM procurement quantities are listed as follows:
|Fire Control Module||12||250||24,738|
After increasing XM8 R&D funding to $5,625,000, the US Army requests an additional $26 million from Congress to purchase 7,000 XM8. The Army wants to field the XM8 system with two combat brigade teams by September 2005. In related news, the XM8’s “Milestone C” review (the prelude to a full-rate production decision) is pushed back from September 2004 to February 2005.
Colt’s Paul M. Hochstrate and Michael F. LaPlante file an application for an improved lockwork and selector switch design. The new design would allow a M4/M16 selector switch to travel from Safe to Semi to Auto within 90 degrees of movement as opposed to the current 180 degrees.
TACOM–ARDEC issues a market survey announcement for frangible, non-toxic, limited-range training ammunition in 5.56mm, packed in links and individually. The ammunition (both tracer and ball) should be capable of being fired in standard service weapons without the requirement for any special weapon modifications or the presence of ancillary devices. The ammunition’s trajectory and performance characteristics shall be comparable to standard service rounds out to 100 meters and have a maximum range that is less than standard ammunition.
ARDEC issues a market survey announcement for a 40mm Grenade Launcher Module (GLM). The GLM must mount on the M4 Modular Weapon System with a mounting architecture flexible enough for adaptation to future rifles/carbines. The GLM should be capable of firing all current US standard 40x46mm low-velocity ammunition. Additionally, it must accept munitions with longer payloads/warheads, which are unable to be loaded and fired in the M203 system. The GLM should weigh less, be more reliable, more ergonomic, more accurate, and safer than the M203. It should also be capable of mounting the AN/PSQ-18A Day/Night Sight.
TACOM awards Okay Industries a $3,110,006.22 contract option for the production of 500,001 M16 thirty round magazines.
PM-Individual Weapons issues a market survey announcement to identify possible sources of a force-on-force training simulator with the capability of simulating the effects of the XM29 Air Burst Weapon System. The proposed solution must include the integration of the HEAB simulation module with the current Modular Integrated Laser Engagement System (MILES) used by the US Army for 5.56mm weapons. The system selected must already be in production to allow for the integration and test effort.
TACOM–ARDEC issues a solicitation for 6,000 to 42,000 M249 Accessory Rail Assembly kits. The Accessory Rail Assembly Kit will attach to the front part of the M249 Machine Gun and provide three MIL-STD-1913 rails for mounting various optical devices and accessories.
PM-Soldier Weapons issues a sources sought notice for a Red Dot Weapon Optic system to be used with the M4 MWS, M16A2, and M16A4. The device will be a non-magnifying, reflex sight with a 1 to 4 MOA red dot reticule and manually adjustable brightness settings. It will also contain an anti-reflection device to minimize glint, and be mountable on MIL-STD-1913 rail system. The optic must be able to withstand the rigors of use in a military environment and still maintain zero. Battery life must be comparable to current M68 CCO.
NSWDG issues a solicitation for 120 J-Point mounting kits for the ACOG, and standard 1″ and 30mm scopes. Each kit must contain a J-Point MRD and several mounts for attachment of the J-Point to the various host optics.
ACA-Fort Leonard Wood issues a solicitation for M4 and M249 Simunition kits and accessories.
Steyr Mannlicher (M) Sdn Bhd introduces the AUG A3. The new variant possesses accessory rails, an optional integrated 40mm grenade launcher, and reportedly, a new magazine well/latch system that can interchangeably accept original AUG magazines and STANAG 4179 compliant magazines. (This should not be confused with ADI‘s own AUG A3 project, which offers a different configuration of accessory rails and modular assemblies. Update: ADI has since renamed their AUG A3 as the F88A4.)
ARDEC issues a sole-source solicitation to Frontier Performance Polymers Corporation for the fabrication of 100 5.56mm unprimed, one-piece plastic cartridge cases.
NSWC-Crane issues a solicitation for 93,000 to 2,500,000 5.56mm Dim Tracer Cartridges.
NSWC-Crane issues a sole-source solicitation to Trijicon for 218 Reflex Sights (RX01M4A1).
NSWC-Crane awards separate ECOS-C contracts to Canadian Commercial Corp. (ELCAN), EOTech, and Trijicon. The individual awards are worth up to $16,666,666 for a maximum of 66,666 ECOS-C apiece. The EOTech sight is later relabeled the ECOS-CQB, with the official designation SU-231/PEQ. This leaves the ELCAN SpecterDR (SU-230/PVS Articulated Telescope) and a product improved Trijicon ACOG (SU-237/PVS Sight Unit) to compete for the final ECOS-C downselect.
PM-Soldier Weapons issues a sources-sought notice for a COTS weapon optic system to be used with 5.56mm rifles. The optic must possess the following characteristics: approximately 4x32mm, allow target engagement out to 800 meters, integral ballistic correction for range without external adjustment, Day/Night illumination capability (without use of batteries but NRC exempt), an Anti Reflection Device, a Laser Filter Unit (or compatible to be fitted with Laser eye protection filters/goggles), MIL-STD-1913 rail system compatible, and able to withstand the rigors of use in a military environment.
TACOM issues a sole-source solicitation to Polymer Technologies for 12,000 M249 100 Round Soft Pack Magazines.
ACA-Fort Bliss issues a sole-source solicitation to SNC Technologies for M16A2, M249, and M9 conversion kits, M4/M16 conversion kit magazines, marking cartridges, linked marking cartridges, and protective gear.
Eric S. Kincel files a patent application for the design of the Vltor Mod Stock.
NSWC-Crane issues a solicitation for 40x46mm warning cartridges, with ranges of 100, 200, and 300 meters. Projected quantities run from 100 to 300,000 of each range offered.
KAC‘s Doug Olson and Reed Knight file a patent application for a rising chamber, differential recoil firearm suitable for both conventional and telescoped cartridges.
Twelve SCAR candidates from nine vendors are submitted to USSOCOM for testing. Only limited information has been released by certain vendors concerning their submitted prodcuts. For instance, the Robinson Armament XCR is disqualified at the start for the late receipt of Blank Firing Adapters (BFA).
Funding for the XM8 R&D effort is increased to $7,400,000.
HK‘s Johannes Murello, Wilhelm Fischbach, Thomas Schweikart, and Alexander Stumpp file US patent applications for the cosmetic design and layout of the XM8 Carbine with the side-folding adjustable stock, the Carbine with the XM320 attached, The Designated Marksman/Automatic Rifle variant, and the Special Compact variant with a flush collapsible buttstock.
TACOM awards a $45,902 delivery order to FNMI for 100 M16A4. These rifles are intended for FMS. Later, TACOM awards an additional $3,672.16 delivery order for 8 M16A4. The latter rifles are intended for the USMC.
ACA-Fort Lewis issues a solicitation for 90 FAR M4 flattop upper receivers w/ four integral rails, 4 rail gas block, and 16 inch chrome M4 contour barrel with 1/9 twist; 46 FAR M5 flattop upper receivers with 4 integral rails, 4 rail gas block, and 20 inch HBAR Match (non-chromed) barrel with 1/9 twist; 136 Rock River N.M., two stage, non-adjustable trigger assemblies; and 46 flip-up front and rear sights.
AAI and General Dynamics Armament and Technical Products independently announce receiving contracts for Phase 1 of the Lightweight Machine Gun and Ammunition (LMGA) program. AAI receives $1.2 Million while GDATP receives $3 Million. GDATP‘s team includes KAC, who is tasked with weapon co-development and manufacture.
ARDEC issues a solicitation for 2,000 to 11,000 40mm Grenade Launcher Modules (GLM). The GLM must mount on the M4 Modular Weapon System with a mounting architecture flexible enough for adaptation to the M16A2/M16A4 along with future rifles/carbines. The GLM must also be adaptable to a stand-alone configuration. The GLM should be capable of firing all current US standard 40x46mm low-velocity ammunition. Additionally, it must accept improved lethality munitions with longer payloads/warheads than current 40x46mm munitions to accommodate system growth. The GLM should be more reliable, more ergonomic, more accurate, and safer than the M203. When removed and replaced, the GLM will return to its normal bore alignment regardless of the host weapon interface. The GLM must have a probability of hit (within a 5 meter radius) of 60 percent at 100m, 50 percent at 200m, 30 percent at 300m, and 20 percent at 400m. The GLM shall include a sight that provides day and night targeting, and a secondary sight in the event the primary sight becomes inoperable or separated from the weapon. The GLM system must also have a range determination capability.
NSWC-Crane issues a sole-source solicitation to Nico Pyrotechnic for 24,000 to 500,000 40x46mm grenade cartridges.
ARDEC‘s Non-Lethal/Scaleable Effects Team issues a sources-sought notice for consulting work on improvements to be made to the non-lethal muzzle launched ordnance (MLO) currently under development. The MLO is designed to be attached to the muzzle of the M4 carbine or M16 rifle. A blank cartridge is used to launch the non-lethal payload. A bullet trap version is also in development. Improvements to be made are to the reliability, safety, producibility, and ruggedness of the ordnance. The contractor will provide recommendations for improvements and upon approval from ARDEC, provide updated manufacturing drawings as part of the US Government-owned Technical Data Package.
Picatinny awards a $1,010,851.50 contract to Defense Technologies Corp. for 84,568 40mm M1029 Crowd Dispersal Cartridges.
On behalf of the US Army, Wayne Stevens and Jeff Windham file a patent application for a shotgun barrel insert or replacement barrel for 40x46mm grenade launchers. Unlike existing inserts, the design will extract and eject the shotshell hull (instead of the complete insert) once the weapon is opened.
The Army approves a requirements document for an accessory shotgun system. It calls for a 12-gauge shotgun with door breaching and nonlethal/lethal capabilities built into a system that works with the M4 MWS. The requirements document also calls for the ability to fire rounds that are either 2.75 or 3 inches long.
TACOM issues a sole-source solicitation to Polymer Technologies for 14,900 M249 100 Round Soft Pack Magazines.
USCG Maintenance and Logistics Command-Atlantic issues a sole-source solicitation to the Simunition Division of SNC Technologies for 12 M4 flattop 10.5″ conversion kits, 5 M16A2 conversion kits, 20 M9 conversion kits, FX marking cartridges, and protective gear.
USAF Air Education and Training Command, 37th CONS – Lackland AFB issues a solicitation for 20 M4 conversion kits, 160 M4 conversion kit magazines, 20 M11 conversion kits, 10,000 each red and blue FX marking cartridges, and protective gear.
Abrams Airborne Manufacturing’s (Vltor) Matthew J. Stoner, Cade L. Wilson, Gustavo T. Palacios, Jeffrey W. Henderson, and Gregg T. Mott file a patent application for the CASV accessory rail forearm.
The Italian Ministry of Defence places a contract for at least 24,000 Aimpoint CompM2.
Connecticut’s Congressional delegation sends a letter to Les Brownlee, Acting Secretary of the Army, questioning why Colt has been excluded from the Army’s XM8 weapons program.
$25.9 million budgeted for XM8 production is cut from a FY 2005 Department of Defense appropriations bill. Reportedly, an additional $1 million was budgeted to HK for the production of polymer-cased ammunition.
TACOM awards a $305,602 delivery order to Colt for 319 M4A1. These are for the US Army and Navy.
TACOM awards a $1,614,822 delivery order to Colt for 1,707 M4 Carbines.
The Republic of Georgia announces its intent to purchase 1,000 IMI Tavor for its Special Forces units. The deal is reportedly worth $1 million.
NSWC-Crane issues a sole-source solicitation to Insight Technology, Inc. for 13 AN/PSQ-18A M203 Day/Night Sights, 13 AN/PEQ-5 Carbine Visible Lasers, and 36 AN/PEQ-2.
The Robert Morris Acquisition Center’s Aberdeen Branch issues a sole-source solicitation to Insight Technology, Inc. for up to 16,000 Integrated Sighting Modules (ISM) and Advanced Magnified Optics (AMO). These will be used with the M4, M16, and XM8. The ISM is a 1x optical sight with integrated red dot and near infrared (NIR) aiming and fixed focus illuminating lasers. The red dot and the NIR lasers shall be co-aligned and shall adjust for azimuth and elevation using a common adjustment mechanism with no special tools. The AMO is a 4x magnification optical sight with integrated red dot and NIR aiming and variable focus illuminating lasers. The NIR aiming pointer on the ISM and AMO shall have a range of 600m in low power and 2,000m in high power. Additionally, both sights shall utilize a common commercial battery (e.g., AA or 123.)
MARCORSYSCOM amends its earlier combined synopsis/solicitation regarding Rifle Combat Optics (RCO) for the M16A4. Later in the month, MARCORSYSCOM awards Trijicon a $7,500,000 multi-year contract for the Rifle Combat Optic (RCO). The RCO is a modified version of the TA31 ACOG scope.
TACOM issues an open solicitation for 336,185 M16 thirty round magazines.
Tonny Kaempe receives US Patent #6,763,627 titled “Bipod for light-weight machine gun.”
TACOM–ARDEC issues an open solicitation for 700,000 to 1,300,000 5.56mm M862 Short Range Training Cartridges. In addition, there will be yearly options through 2008 for an additional 700,000 to 8,000,000 cartridges per year.
PM-Crew Served Weapons issues a market survey announcement for sources which can develop and demonstrate an alternative cartridge case material for the family of small caliber cartridges (5.56mm up to .50 Cal.). The goal of this effort is to reduce cartridge weight by at least 20 percent by replacing the brass case with an alternative lightweight cartridge case. The assembled lightweight cartridge shall match or exceed the current ballistic performance specifications requirements of the standard production brass cased ammunition and be capable of being implemented into current manufacturing and final assembly process (i.e. primer & mouth sealant, propellant loading, linking, packaging etc.). The lightweight cartridge case is expected to perform and survive the same environment as traditional brass casings in the currently fielded legacy machinegun (open bolt) and rifle (closed bolt) weapon systems.
ARDEC awards a $30,764 contract to Battelle Memorial Institute to study and store 40x46mm and 40x53mm Flash Bang grenades.
ARDEC‘s Non-Lethal/Scaleable Effects Team, Picatinny, NJ announces a sole-source solicitation to Mr. Frank Dindl, a senior mechanical engineer from the Weapons Systems Team, Light Armament Division of RDECOM‘s Close Combat Armaments Center. As the owner of the Intellectual Property rights for the design in question, Mr. Dindl will perform consulting work regarding improvements for a non-lethal, Muzzle Launched Ordnance (MLO) currently under development.
NSWC-Crane awards Litton Electro-Optical Systems and Insight Technology $24,999,999 apiece for the development of the Image-Intensified Clip-On Night Vision Device (CNVD-I2) and the Clip-On Night Vision Device Thermal (CNVD-T), respectively. (These are later type-classified under the designations AN/PVS-24 and SU-232/PAS.)
PM-Soldier Weapons issues a market survey announcement for a Machine Gun Weapon Optic System to be used with the M249, M60, and M240B. The device must have a magnification of 3.5x (+/-0.5x), contain a lighted reticle with adjustable brightness and bullet drop compensation lines out to 1200 meters, and incorporate an Anti Reflection Device and a Laser Filter Unit. The scope must be mountable on MIL-STD-1913 rail system, and maintain zero retention during and after weapon firing. Power source must be commonly available or found on a standardized list of military batteries. Battery life must be comparable to the current M145 Machine Gun Optic.
TACOM issues a solicitation for 3,000 M249 Improved Bipod Assemblies. In addition, there may be four subsequent options with the potential of up to 6,000 additional Improved Bipod Assemblies per option. The Improved Bipod Assembly must possess rugged one-hand adjustable legs and a capability to adjust the firing position of the weapon without moving the bipod legs. The Improved Bipod Assembly legs must also be stowed and retained securely without interfering with either optical devices or other accessories mounted on the weapon’s forward rail assembly.
ARDEC awards a $596,302.50 contract to TRI Technologies Inc. for 15,000 M249 Accessory Rail Assembly Kits.
USAF Air Mobility Command, 62nd CONS – McChord AFB issues a solicitation for SNC Technologies FX equipment. This includes 15 M4 flattop conversion kits, 150 M4/M16 conversion kit magazines, 15 M9 conversion kits, FX marking cartridges, and protective gear.
On behalf of the US Army, Gary J. Houtsma receives US Patent # 6,779,290 titled “Semi Permanent Backup Iron Sight.”
Diemaco’s David Compton receives US Patent #6,775,942 titled “Accessory Rail Mount Adapter for Rifles and Carbines.”
The Army Deputy Chief of Staff G3 issues a memorandum, “Analysis Supporting Objective Individual Combat Weapon (OICW) Increment I Milestone (MS) B Decision,” to TRADOC, initiating an analysis of alternatives.
USMC Ground Board 2-04 convenes to review and revalidate the POM-06 GCE ACL. Prioritized in third place is the Infantry Capability Set, which includes the Modular Weapon System and Rifle Combat Optics. The ninth priority item is the Automatic Rifle, a replacement for the M249 in the infantry squad.
TACOM awards a $67,934.96 delivery order to FNMI for 148 M16A4. These rifles are intended for the US Army and FMS to Oman. Later, TACOM awards an additional $7344.32 delivery order for 16 M16A4. The latter rifles are intended for the US Army and Federal Bureau of Prisons.
TACOM awards a $2,349,340 delivery order to Colt for 2,716 M4 for the USAF. This is followed by a $463,540 delivery order for 490 M4 for the US Army National Guard, and another delivery order totaling $937,575 for 1,020 M4 and 15 M4A1 for the USAF, US Army CID, Federal Bureau of Prisons, and Department of Energy.
TACOM–ARDEC issues a market survey announcement to identify sources capable of providing a lubricous coating for critical small arms weapon components. This coating is desired to eliminate the need for wet lubrication. Currently, most weapon parts are steel coated with either hard chrome or phosphate and maintained with wet lubrication. This potential coating is expected to function without need for external lubrication in adverse conditions to include: sand, dust, extreme cold (-65 degrees Fahrenheit), extreme heat (400-800 degrees Fahrenheit), rain, mud, salt water, Nuclear/Biological/Chemical (NBC) decontamination solvents, etc. The maximum operating temperature is dependent upon the weapon component in question. The following characteristics should be addressed as to how they well they perform with respect to hard chrome and phosphate: 1) Corrosion protection; 2) Abrasive and sliding wear resistance; 3) Adhesion to substrate; 4) Coefficient of friction; and 5) Coefficient of thermal expansion.
ARDEC issues a sole-source solicitation to Colt for 63 M4A1 Carbines. Sixty will have a coating of Nickel Boride applied to the individual components of the weapon. The remaining three M4A1 Carbines will be manufactured and delivered using the current anodizing and phosphate coatings.
US Army Field Support Command issues a solicitation for a second-source prime contractor capable of producing up to 500 million rounds annually of small caliber ammunition: 5.56mm, 7.62mm and .50 caliber ball, tracer, and blank.
The ARL publishes the report “Finite Element Modeling and Analysis of an M855 Cartridge.” The goal of the research was to develop and validate a baseline mechanical model for a brass M855 cartridge during realistic firing conditions. The results were validated with experimental measurements from expended M855 cartridges and showed good correlation with the predicted plastic deformation of the model. The creation of the validated model serves as a platform from which alternative lightweight materials for the cartridge case can be evaluated analytically.
Lake City issues the report “Trajectory Match, Jump, and Error Budgets for M855.”
Under contract to the ARL, Arrow Tech Associates publishes “Final Report of the 5.56 mm In Bore Balloting Analysis.”
The Philippine Armed Forces sign a contract for 1,739 FN Minimi worth P593.3 million.
ARDEC issues another solicitation for the 40mm Grenade Launcher Module (GLM). As an approved Soldier Enhancement Program system item, the GLM must be COTS/NDI, ready for use or requiring only minimal modification (expected modifications are sights and rifle/carbine integration). The base contract will order 60 systems for developmental testing. This contract will also contain two options: the first option for 500 to 2,000 systems, and the second option for up to 9,000 systems.
NSWC-Crane issues a sources-sought announcement for multi-purpose, long-range, programmable 40mm air-bursting ammunition. The ammunition must be safely employed from a shoulder-fired grenade launcher. Desired is a HEDP warhead weighing ~250 grams launched at a velocity of ~100 meters per second. (This contrasts to standard 40x46mm Low Velocity ammo which launches a ~180g projectile at 76m/s, but not nearly as fast as the 40x53mm High Velocity round used in the Mk 19 Mod 3 and other crew-served GMG.) The additional mass and velocity will help extend the maximum range to 600 meters versus the typical 400m range of the 40x46mm. In addition, this provide the side benefits of reducing the time of flight and giving a flatter trajectory. The programmable fuse must possess three specific detonation modes: 1) Air-Burst Mode for enemy troops in open or defilade, 2) Impact Mode for light to medium armored vehicles and barriers, and 3) Delay Mode for firing through windows or other light barriers. Impact mode will be the default if not otherwise set. The fuse must also have an inherent Self Destruct Mode with a factory-set time delay that will cause the warhead to detonate if any of the programmable modes fail. Finally, the round sought must operate in all Special Operations Forces environments, to include submersion in up to 66 feet in seawater. Nammo just happens to be working on such a programmable, medium velocity 40mm round with most of the desired characteristics. It has been developed for the Swedish Squad Support Weapon (SSW) project, the Nordic answer to the OICW and the French PAPOP. This is not to say that NSWC-Crane is necessarily interested in the SSW. They are more likely viewing it with an eye toward use in the EGLM as part of the Enhanced Indirect Fire Munitions (EIFM) project.
TACOM–ARDEC issues a solicitation for a “reliable, durable” XM26 Modular Accessory Shotgun System (MASS) to provide door breaching, lethal, and non-lethal capability during CQB operations. The MASS will attach to a primary weapon (M16A2, M16A4, M4, or M4A1), with the potential for attachment to future rifles and carbines. The MASS must be capable of being removed or attached to the primary weapon without the use of tools while maintaining bore alignment with the primary weapon’s sights. The MASS must also be capable of use as a stand alone shotgun, with a sighting system and an integrated (or attachable) MIL-STD-1913 rail for the attachment of various accessories. The MASS will be manually or semi-automatically operated and capable of firing all current U.S. Army standard 12 Gauge Ammunition. The base contract will comprise 50 systems for use in developmental testing. Follow-on options will include up to 5,000 systems per year for 6 years.
TACOM–ARDEC issues a solicitation for an initial quantity of 3,920 M249 Collapsible Buttstock Assemblies. In addition, there may be two subsequent options with a potential of 1,000 to 4,000 Collapsible Buttstock Assemblies per option.
TACOM–ARDEC issues a solicitation for an initial quantity of 6,100 M249 Forward Pistol Grip Assemblies. In addition, there may be four subsequent options with a potential of 6,000 to 12,000 Forward Pistol Grip Assemblies per option.
TACOM issues a sole-source solicitation to Polymer Technologies for 7,841 M249 100 Round Soft Pack Magazines.
ACA-Fort Campbell issues a solicitation for CQB Muzzle Brake Sound Suppressors: OPS 15th Model CQB MBS or equal. The suppressors must have the following characteristics: 5.56mm/.223 caliber; 1.5 inch diameter; 3.5 inch (max) length past muzzle brake; 7.25 inch overall length (max); weight 17 ounces (max); fusion welded 300 series stainless steel construction; sound attenuation 30db or better; and endurance meets SOPMOD objective at 30,000 rounds under various firing schedules.
Naval Special Warfare Group 1 issues a pair of solicitations for 150 Simunition Colt M4 Conversion Kits and 921 M16/M4 conversion kit 20 round magazines.
USAF Air Mobility Command, 22nd CONS – McConnell AFB issues a solicitation for 14 Simunition M4 flattop conversion kits, 20 M16/M4 conversion kit magazines, 25 M9 conversion kits, FX marking cartridges, and protective gear. This solicitation is later cancelled.
USSOCOM issues a sole-source solicitation to EOTech for 134 Model 550 Holosights with the 2D standard reticule pattern.
ARMS‘ Richard Swan files a patent application for a low-profile, spring-loaded, flip-up, backup iron sight.
Colt’s Vincent Battaglia receives US Patent #6,792,711 titled “Firearm Adapter Rail System.”
The JSSAMP is updated yet again.
The House of Representatives Conference Report 108-773 directs the Army to report to the Congressional Defense committees not later than November 15, 2004, on plans to begin fielding the XM8 family of weapons.
The National Small Arms Center issues a source-sought announcement for research proposals. The proposals cover three Research Areas: New Metal Coating Technology for Greaseless Weapons, Anti-Materiel Sniper Rifle (AMSR) and 5.56mm Polymer Cased Ammunition.
Iran’s Defense Industries Organization (DIO) unveils an indigenously produced 5.56mm bullpup assault rifle, designated the KH-2002. Some observers have noted that the lower receiver appears to be that of a M16.
USSOCOM awards FN a contract for the SCAR and EGLM. The first delivery order is worth $634,390. The SCAR-L, SCAR-H, and EGLM subsequently receive the tentative designations EX 16 Mod 0, EX 17 Mod 0, and EX 13 Mod 0 respectively. The only info released by FN indicates that their weapon uses a short-stroke gas system and a metal receiver.
ARDEC issues a sources-sought announcement for a Non-Developmental, multi-configurable, 5.56mm modular weapon system. The system shall consist of four variants to include: Special Compact (SC), Carbine, Designated Marksman (DM), and Light Machine Gun (LMG). All variants need to function in both semi-automatic and automatic firing modes, with the LMG‘s primary firing mode being full auto.
|Requirements||Special Compact||Carbine||Designated Marksman||Light Machine Gun|
|Accuracy: Probability of Hit||40% at 100m (Moving Target)||60% at 150m (Moving Target)||50% at 500m (Stationary Target)||4% at 600m (6rd Burst: Hits on Single Target out of 8 Target Array)|
|Mean Rounds Between Essential Function Failure (MRBEFF): Class III||18,000||18,000||18,000||18,000|
|Mean Rounds Between Essential Function Failure (MRBEFF): Class I and II||2,300||2,300||2,300||1,900|
|Minimum Practical Rate of Fire (rpm)||45 (Semi)||45 (Semi)||45 (Semi)||72 (Auto)|
|Basis of Issue||20%||60%||10%||10%|
Other features include a Multi-Purpose Sighting System (MPSS) capable of precision fire out to the desired effective range of the weapon, yet fast enough to allow successful engagement of a 50m target within 1.5 seconds. Back-up sights are required which allow for the engagement of targets out to 300m without removal of the MPSS. In addition, the weapons shall include limited visibility fire control with an infrared aim light and illuminator. The weapons must be compatible with all standard 5.56mm NATO ammunition including the Mk 262 Special Ball. The weapons shall be ambidextrous with respect to: the selector switch, charging handle/forward assist, magazine release, and bolt catch. Furthermore, ejected cartridges must not be channeled to the rear as this can interfere with use by left handed shooters. The weapon must possess an adjustable stock which can accommodate all users between the 5th and 95th percentile in size. Minimum barrel life shall be no less than 15,000 rounds. The flash hider should minimize dust signature and act as a muzzle brake. It should also allow for a no-tools attachment of a sound suppressor. Attachment points are desired for the mounting of a 40mm grenade launcher or a 12 gauge shotgun. The LMG shall provide for a quick-change barrel capable of replacement in under 30 seconds while under combat conditions. The LMG barrel shall also provide the operator a visible means of determining cautionary heat levels. In a swipe at Colt’s sole-source status for the M4 Carbine, data rights are demanded for the purpose of competitive bidding and second-source contracting.
TACOM awards a $19,860 delivery order to Colt for 20 M4A1.
The Army Deputy Chief of Staff (G3) tasks the Soldier Battle Lab to compare the SDMR with existing Army weapon systems.
Project Manager-Maneuver Ammunition Systems issues a sources sought announcement for 2,400,000 to 23,400,000 5.56mm M995 Armor Piercing cartridges.
The USCG‘s latest Ordnance Manual, COMDTINST M8000, is reviewed at the Ordnance Conference. All references to the LW .499 are stricken.
IMI announces that it is in the process of designing a competitor to the FN P90. The Shin Bet security service requires a replacement for the Micro Uzi and Micro Galil; however, the Belgian government has embargoed their orders for the P90. The PDW development team is led by Ilan Shelo, who also led the development team responsible for the Negev LMG. Certain features will be taken directly from the P90, such as its translucent, horizontally mounted magazine.
The Ontario Knife Company’s Nicholas Trbovich, Jr. and Kathyln Susan Green receive US Patent #D498,285 titled “Bayonet.”
TACOM–ARDEC announces its intent to request a sole-source proposal from ATK for continued MEMS Safe & Arm design. This requirement will include development and demonstration of MEMS-based 25mm air-bursting munitions capable of being fired from the XM25 weapon system. The contractor will perform testing of prototype MEMS-based mechanical Safe & Arm devices in 25mm High Explosive Air Burst (HEAB) projectiles for continuation of the OICW System Enhancements’ Science and Technology Objective (STO).
The OICW Program Office prepares a draft XM25 acquisition strategy to address the incremental acquisition process.
TACOM–ARDEC issues a market survey announcement to identify sources capable of providing 38,016 to 295,016 40mm M1029 Crowd Dispersal Cartridges. The design consists of an aluminum case containing 48 rubber balls, each measuring 0.48 inches in diameter and weighing 1.3 grams.
At FN Herstal in Belgium, USSOCOM representatives conduct the first critical design review for the SCAR since the award of the contract. During a period of three days, the development team works side-by-side with Operators for an iterative design process. Operators test the weapons on the range to gauge the initial capabilities of the weapons which they had previously outlined in the requirements. The development team is then able to make immediate changes and improvements to prototypes and designs. Suggested areas for improvement and change include:
- Safety lever changes
- Magazine release protectors
- Trigger reset
- Pistol grip design
- Bolt release protectors
- Charging handle design
- Sling attachment points
- Color change from black to neutral
Upon conclusion, FN delivers a modified mockup prototype within 24-hours based on the feed-back received. In addition, the first SCAR-H prototype is unveiled and tested. Based upon the progress made so far, the decision is made to condense and accelerate the program increments to the following: 1) Development of the SCAR-L (with integrated EGLM) and the SCAR-H for concurrent fielding; 2) Ensure EGLM compatibility; 3) Production of the SCAR in Enhanced Calibers as directed by USSOCOM and the Integrated Product Team. Development of the EGLM to use Fuse Programmable Ammunition; 4) Continue development of SCAR and EGLM capabilities.
Portugal’s Ministry of Defense announces that it is accepting bids for 31,000 5.56mm rifles and 1,700 light machineguns in a deal worth 75 Million Euros. Bids are expected from Swiss Arms (formerly SIG), FN, HK, Colt, IMI, Steyr, Diemaco, and Singapore Technologies Kinetics.
The USCG issues a solicitation for 4,500 M16 thirty round magazines.
NSWC-Crane announces changes to the RIS II specification. A rigid or monolithic interface system is desired which will allow for a free-floating carbine barrel, yet withstand the shock of firing all currently fielded 40mm rounds, and maintain zero repeatability when accessories are removed and remounted. While MIL-STD-1913 rails are still required, alternative intermediate or supplemental interfaces will be considered if they will allow the EGLM and other lower rail subsystems to be mounted as closely to the carbine barrel as possible without touching it. The solicitation is still limited to vendors who had previously submitted proposals for the RIS II.
NSWC-Crane also announces changes to the ITPIAL II solicitation. The proposed maximum quantity is reduced from 41,666 to 25,018. Later in the month, NSWC-Crane awards a $48,997,789.28 contract to Insight Technologies for 25,018 ITPIAL II . In part due to the fact that it meets the requirements for both the ITPIAL II and CVL II, the device is later renamed the ATPIAL (Advanced Target Pointer, Illuminator, and Aiming Laser). It is given the formal designation LA-5/PEQ. (This is eventually changed to AN/PEQ-15.)
TACOM awards Center Industries a $10,821,250 contract option for the production of 1,375,000 M16 thirty round magazines.
TACOM awards Okay Industries a $4,043,000 contract option for the production of 650,000 M16 thirty round magazines.
Norgon, LLC’s Robert H. Garrett and Sandy A. Garrett, Jr. file a patent application for the Ambi-Catch ambidextrous magazine release for the M16 family.
PM-Crew Served Weapons issues a sources-sought announcement for a NDI 40mm short-range anti-personnel shotgun-type cartridge. The cartridge must be compatible with the M203 Grenade launcher, can be fired quickly without precise aiming, and have a high probability of producing casualties. The cartridge must demonstrate a lethal anti-personnel capability out to a maximum range of 50 meters (75 meters desired). A minimum casualty level of 30 percent kill probability is required at the maximum effective range against standing men under the 30-second defense / 100 percent incapacitation casualty criterion. The physical and functional characteristics of the cartridge will be compared to the capability of the current 40mm, Multiple Projectile, M576 Cartridge. If enough credible interest is generated, a Foreign Comparative Test (FCT) or Soldier Enhancement Program (SEP) may follow.
PM-Crew Served Weapons also issues a sources-sought announcement for a NDI short-range anti-personnel shotgun-type rifle grenade cartridge that is compatible with the M4 and M16. The rifle grenade must be a muzzle launched system that uses standard combat ammunition. The grenade must be fired quickly and not require an adapter for use. It will be used in crowd suppression in urban areas and is intended for brief, short-range firefights with restricted fields of fire. The grenade must be able to demonstrate a lethal anti-personnel capability against multiple targets out to a maximum range of 50 meters. It must be compatible with all currently used mounted accessories such as sights, rail systems, and optics. In addition, the grenade may not degrade the performance or the useful life of the host weapons. If enough credible interest is generated, a Foreign Comparative Test (FCT) or Soldier Enhancement Program (SEP) may follow.
HK‘s Jurgen Gablowski receives US Patent #6,829,858 titled “Grenade Launchers and Methods to Secure a Grenade Launcher to a Firearm.”
by Daniel E. Watters, Small Arms Historian
Post questions or comments at The 5.56mm Timeline’s Facebook page.
Last Revised: 05/17/2009
This article was originally published at The Gun Zone — The Gunperson’s Authoritative Internet Information Resource. My friend and mentor Dean Speir has graciously hosted my articles at TGZ for nearly 16 years. These articles would likely have never appeared online without his constant encouragement and assistance.
With TGZ’s closure in early 2017, Dean encouraged me to find a new home for my scholarship so it wouldn’t be lost in the dustbin of the Internet. Loose Rounds has welcomed me with open arms. In the future, I intend to expand my legacy TGZ articles and add new contributions here at Loose Rounds.