Phone it in Friday continues with this post from the RIA blog about and evergreen topic. WW2 German camo.
by Sean McCarthy
In our previous article in this series, we discussed the Waffen-SS “Blurred Edge” pattern, a novel example of early camouflage employed on a larger scale. The focus on World War 2 Germany will continue by examining Splittertarnmuster, more commonly known as “Splinter” camo. It will be referred to as “Splinter” throughout this article, with distinction made to different variations used by the Heer and Luftwaffe (land and air forces, respectively).
Development of Splinter Camo
The earliest versions of a splinter-type camouflage came during World War 1, where they were used to hide trucks but never moved beyond that level of implementation.
The two main patterns of Splinter we will be looking at are Heeressplittertarnmuster 31 and Luftwaffesplittertarnmuster 41, where the number at the end of the name denotes the year of its deployment. Heer pattern was first conceived two years earlier in 1929 and in those early stages of initial development, Splinter camo was intended for use on German Zeltbahns, a type of tarp that could be used as a poncho or a small shelter. It would first be issued two years later in 1931.
The Luftwaffe version came about in 1941, just before the invasion of Crete which saw widespread deployment of the feared Fallschirmjäger paratroopers. The Luft version was more or less the same, but the geometric patches were smaller than the Heer variety. The basic design of both versions saw the larger shapes in the pattern colored brown and the smaller ones green, printed over a grey/green background.
Later Luft designs (intended for use in Africa) switched the color of the patches, the larger being green and the smaller brown. Development and production of Heer and Luft camouflage was overseen by the German Army. Interestingly enough, this occurred separately from patterns developed for the Waffen-SS which had its own division for such purposes.
Deployment of Splinter Camo
Much like the Blurred Edge pattern, Splinter camo found use in many different ways. It was prominently featured on jump smocks worn by the Fallschirmjäger paratroopers, as well as on their helmet covers, ammunition bandoliers, grenade pouches, and even the shoulder boards on which rank insignias were displayed. Pictured below is what appears to be a member of the Fallschirmjäger holding a Panzerfaust warhead.
This varied usage was similar for the Heer forces, which included printing on insulated winter gear such as gloves and insulated hoods. Splinter saw such success that variations of the pattern were used by other nations post-war. France, Switzerland, and Bulgaria all employed camouflage patterns that bear striking similarities to Splinter. In particular, a French pattern from 1950 is virtually indistinguishable save for minor changes to the geometry of the colored patches. The pattern’s further evolution after the fall of Nazi Germany is indicative of its revolutionary design.
Read the rest of this very good post below.