This past week, I sold a few of my older weapon mounted lights (WML) and got some very awesome deals on replacement lights. I sold several, over 12 years old, Insight M3 tactical lights and a first Gen Streamlight TRL-1. I carried some of these on duty years ago when they were the best/newest WML out there. All were in like new condition and served me well, but with 65 and 80 max output lumens, these lights were very outdated. In fact, they were dangerously inadequate for my needs. I probably hung on to them for a few years, far to long because of sentimental reasons, and I was so use to them.
For a pistol weapon light, I personally like lights at or under 200 lumens. I have found that this provides very adequate target identification light, while preserving my night vision, with appropriate use. The new lights at 500, 600 and over lumens, have a negative effect on my night vision, with momentary on and off use indoors and at typical handgun engagement distances. I find that I get several spotting/blinding circles, from the momentary on position with over 500 lumens. While this is great for blinding your adversary, it also creates those hard to recover spots in my eyes.
I was able to sell off all of my older WML’s and broke even with their replacements, (pretty damn good). I was able to find two (2) new in box, Surefire X300’s and one (1) like new in box, Surefire X300. I have used the X300 before and found the 175 lumen Surefire X300 to be my personal preference, for my home defense/carry handguns. The Surefire’s have a more focused light beam compared to other WML’s. This makes them have a brighter focused beam that extends their range an bit, with a descent cascading peripheral edge light feel.
I think I made out extremely well, replacing my older weapon lights and getting the light output (lumens) I prefer in a home defense or carry weapon light. Now that the Surefire X300 Ultra’s (A and B) are out, you can find some great deals on people selling the older x300’s. I will be replacing some of my rifle WML’s with X300 Ultra’s in the near future. If you happen to find an older quality X300, don’t hesitate to jump on it for your CCW or home defense handgun.
This is the final part in the T&E of the Inland MFG M1 Carbine. In case you have no read the pr4evious posts, I examined the gun closely with plenty of close up pictures and tested the carbine for reliability in mud, snow, water and ice. Now at last is the accuracy portion of the review.
I fired the gun with a few different loads but no match ammo since I could not get my hands on any in an amount that would have mattered. I tested the gun using ball, which is what I think most buyers will be using and a federal soft point rounds that for some reason I marked as a hollow point on the record targets I have no idea why I marked it incorrectly as HPs unless it is just out of habit. Rest assured the target groups marked as “HP” is a mistake and I actually fired the Federal jacketed soft point load.
First I fired the traditional 25 yard group for establishing a zero. I used five rounds of ball.
I then moved out to 50 yards and 75 yards. This 50 yard 10 round group is with the mentioned Fed SOFT POINT load. The carbine really shot well with this load. I believe this load is the ammo that was used by the PD in the town over in WV across the river from me. The ammo was provided by a police officer and came from the department so it may well be the load Federal intended as a LE or home defense load. It does shoot well in the carbine despite the ammo I used being at least 10 years old that I know of.
The next two pictures are of another 50 yard group and a group fired at 75 yards with the same ammo. I did not fire a 100 yard group due to the fact that my eyes have a hard time with the iron sights on M1 carbines for some reason. I can shoot them just fine for general use, but I really struggle with them when it gets down to taking precise shots in an attempt to fire groups for accuracy testing I have never done well with them and felt it unfair to shoot much further and not know if it was me or the gun. However 75 yards is close to 100 enough to get some kind of idea of what it may do.
I did fire the gun past these shorter distances. I set up the steel target at 300 yards while shooting it when it first arrives. My Dad was with us and before shooting I announced i was going to take some shots at 300 yards with the gun. Everyone chuckled and said “yeah right”. i then asked them if they wanted to bet 20 bucks on me being able to do it. Fortunately for them, they would not take the bet because I found it very easy to hit a roughly man sized target , ( head to belt buckle) at 300 yards with the carbine.
The target is a little hard to see in this picture. But it is in the center of the road. I used a home made tripod to get over the grass but none of the shots used a sand bag or laying prone. I then stood up and made a few hits off hand. The carbine is capable for shots most modern rifle shooters can not make with 308 rifles or more sad to say.
The Inland Carbine is a handy well made and faithful reproduction of the original. It is much nicer and better made than its competition out there making some really rough looking M1 carbines. You can also get the M1A1 paratrooper version of the carbine and a cut down “Advisor” model like used by US troops in Vietnam.
If you like WW2 weapons and history and want a carbine that you can shoot heavily without any guilt, or just want a small handy “trunk gun” this would be a good choice. I would certainly pick it over a SKS or nagant. The rifle comes with the 15 round mag but obviously will take the 30 round magazines. The M1 could be the answer for those people in certain states that governments that have been confusing their role with those of communist states. Or for those who want something not as scary and evil looking as an evil black rifle.
Over all I am very impressed with it. I admit that everyone who was with me during the first testing had major doubts and rolled their eyes at it when I said I was going to do some of the stuff with it I ended up doing, but they became believers. A lot of preconceived biases got busted by this gun. it certainly impressed me. This Inland M1 will perform above and beyond for you within its envelope and a little beyond.
Gray colored gear has become a bit of a thing lately for those looking for tactical gear that doesn’t give an overt military/LE feel.
But is all wolf gray created equal? We’ve gotten a few pieces in to try out so we figured we’d do a color comparison.
Here we have a Blue Force Gear triple mag pouch in their wolf color along with a Emdom USA utility pouch in their SDU gray laying on top of an ATS Tactical RAID II pack in their wolf gray color.
Getting colors exactly correct can be a bit tricky over the internet as camera and monitor settings all play a part. It may not completely come through in the photos but in person the RAID II pack gray has a strong green tint to its color, almost a foliage green. The Blue Force Gear gray has a darker more blue tinted color. The Emdom USA SDU gray has a more brown/tan tint to it.
For further comparison here are the above three pieces of gear along with a coyote brown mag pouch, an OD green canteen cover, a woodland camo buttpack, and an ACU mag pouch.
The Army does not actually consider M855A1 to be armor piercing ammunition, but it is capable of some really impressive penetration. Standard M855 is stopped easily by ¼” AR500 level III body armor, but M855A1 can penetrate even level III+ steel armor.
Bear in mind that the plate in that test was able to stop 5.56mm M193 and 50 gr TSX, .450 Marlin 405 gr JSP, and even a round of 7.62x51mm M61 AP. This plate is seriously tough.
Let that sink in a bit: a standard 5.56mm “ball” round was able to penetrate a target that 7.62x51mm armor piercing ammunition could not get through. Of course the old farts will complain about how their beloved “thuty cal” will carry more energy down range and that is absolutely correct. 7.62x51mm will likely be better at getting through thicker, heavier obstacles like trees and possibly better at multiple layers of light barrier like car bodies. It will definitely be better at chewing up concrete barriers with multiple rounds. Still, at close range, in this narrow use case, a 5.56mm “ball” cartridge outperformed 7.62x51mm AP and that is really saying something. How far away does M855A1 EPR keep that performance edge though?
It is not particularly surprising that it loses some steam and is unable to penetrate at 50 meters, given the light weight of the projectile, but the fact that it can still get through the plate at 25 meters is notable in its own right. There is some limit to the capability of this new round, but it is nevertheless impressive. It is not simply some icepick penetrator, either.
Even when fired from a short barrel, M855A1 shows immediate upset and dramatic tissue disruption. In comparison, M855 shows a much longer “neck,” about four to five inches, actually. The “neck” is the portion of tissue that is relatively undamaged by a projectile’s passing before the bullet begins to yaw, fragment, or expand.
Even when fired from a 16” barrel, the M855 showed a longer neck and less tissue disruption than the M855A1 did from an 11.5” barrel. In other words, the M855A1 is more terminally effective at a lower velocity than M855. There is every reason to believe that it should continue to demonstrate excellent down range performance too, based on the light, three part construction of the bullet. It is refreshing to finally see an effective loading fielded for our soldiers’ 5.56mm rifles. For decades, civilians have enjoyed high performance loads that take full advantage of the 5.56mm cartridge’s potential but our service men and women have made do with an obsolete answer to a question no one cared to ask. The M855 was not particularly good at anything. It was not terrible, of course, but it was far from ideal. At long last, it looks as though the Army has a load that is actually better at penetrating cover than M855 but also produces better tissue damage.
Recently Lipsey’s released another Vickers / Glock collaboration, with the Grey Gen3 RTF2 Glocks, much like the previously released Vickers RTF2 FDE Glocks. While the Vickers Glocks have a lot of Vickers Glock accessories, these Glocks are mainly focused around the 2009 RTF2 frame and are desired for this frame. The RTF2 frame was in production for a very short time and was not really wanted when it first came out. Now people pay a premium for the RTF2 framed Glocks. So, is the RTF2 frame the pinnacle of Glock production? I would say yes, for a pure Glock fighting handgun.
The initial release of the Glock Gen3 RTF2’s in 2009, with the G17 and G22, where met with a lot of visual/cosmetic speculation. Not so much with the RTF2 frame but with the so called “Fish Gill” scalloped slide serrations. Many hated the Fish Gill look and this cosmetic look was the main focus of dislike on the RTF2’s back then. In reality the Fish Gill slide serrations have never been a functional issue/problem. They worked just as well as the standard slide serrations. Glock quickly stopped production of the Fish Gill slides and continued G17, G22, G19, G23 and G21 RTF2 frame production. This makes the Fish Gill Glock slides the least produced RTF2 combination. Then people started to complain the RTF2 texture was to rough for their delicate hands. Some time in 2010 the RTF2 line was halted and was limited to large orders (over 2500) or LE agency production only.
In recent years Lipsey’s has release exclusive Vickers RTF2 Glocks in FDE and now in Grey. These Glocks have sold out very quickly and in some cases for extremely large amounts of money. Most RTF2 frames now sell for premium values since they were discontinued. Why was the RTF2 frame chosen for the Vickers Glock and why are they so desirable now? I do not think the Vickers accessories that are sold with the Vickers Glocks are the main attractive point of these Glock’s. Also, the FDE and Grey colors are not the main focus of the Vickers Glock’s. You can get these accessories and these colors for your standard Gen3 and Gen4 Glock’s. The main selling point of the Vickers Glock’s are the RTF2 frames.
In my opinion the RTF2 frame is the pinnacle of the Glock line for a duty, home defense and training firearm. It is also the best feeling and handling Glock made frame.
The texture of the RTF2 frame is exactly what you want in a fighting handgun. The RTF2 frame has more than 4,000 tiny raised “Pyramids” around the grip. I actually tried to count/calculate one of my personal RTF2 framed Glock’s pyramids and it came out just over 5600 pyramids. The RTF2 frame is not too rough for your hands and it does not beat up or hurt your hands under longs strings of fire. You can feel the slight bite of the RTF2 pyramid texturing but it’s just enough to let you know it is there for you. I have taken the RTF2 to several multi-day training courses and other than a super positive grip, I have had no issues with the grip texture being too rough. When handling the RTF2 Glock in wet and oily environments, it has vastly superior grip-ability over the Gen3 and Gen4 frames.
Now, if you are looking for a daily conceal carry handgun, The RTF2 framed Glocks are not ideal. If you are trying to conceal an RTF2 Glock, having it right next to your skin is not going to feel great. You will have to wear a layer of protective clothing. Also, the RTF2 frames are extremely rough on all clothing, gloves and even your seatbelt. For a training course, duty carry or home defense firearm, the RTF2 is the best of the Glock offerings, for a very positive grip.
The RTF2 frame is built on Glocks arguably most reliable and longest serving Glock frame, the Gen3. I really can’t explain what it is, but the overall grip circumference of the RTF2 frame seems to feel smaller than the standard Gen3 frame. The finger grooves also look and feel smaller than on the standard Gen3 frame. I’m not sure if this is due to the RTF2 texture but the size of the grip feels just right. You feel like you have more hand on the firearm with a maximum hand purchase, 360 degrees around the frame.
The RTF2 Glock general production was stopped in 2010. With some of the Vickers Glocks you may be able to find one here and there, but you are going to pay for it. There are older RTF’s popping up here and there and you will be paying a high price for them as well. I would suggest looking out for Police Trade-In G22 and G23 RTF2’s when they are available. I recently saw some in the mid 300 dollar range. Since G17/22 and G19/23 frames are identical, picking up a cheaper .40 cal trade in model might be the way to go, to get the RTF2 frame.
If you are someone who likes Glocks, once you have an RTF2 framed Glock in your hands, you will probably never let it go. It is the ultimate in positive grip, in the Glock line. I mainly use the RTF2 Glocks for home defense and training classes. The RTF2’s are also great for your load-bearing, armor carrier, chest rig, or SHTF go gear. You will find yourself wanting to carry it for your conceal firearm, but remember it just chews your clothing up to fast. For a pure fighting handgun, the RTF2’s are the best Glock frames you can get. They do perform better than Gen3 and Gen4 Glocks in the grip feel and function area.